http://homesteadrevival.blogspot.com
Whenever I wonder if it is worth it 
to make my own laundry soap, I just recalculate what it costs and I 
remind myself how much money I'm saving. It's nearly 50% less than what I
 was currently using. So when it came time to buy more dishwasher soap, I
 decided to try making my own as well.
I predict that some of you are already rushing to comment that this has not
 worked for you. In all my reading on the web, there are a lot of 
dissatisfied dishwasher owners. Even with the commercial soap. (You'll 
want to read my article on Keeping Your Dishwasher Clean
 to get my thoughts on scum that builds up inside these automated 
washers. A lot of people are making big mistakes, such as using a rinse 
aid when they may not really need one.) The issue isn't just the soap, 
but it's the water that goes through the appliance. 
I'm going to give you the recipe I 
use, keeping in mind that I have a water softener. I'm finding that it 
works for me pretty well, but I had to try a couple of different recipes
 before I got one that worked just right. This isn't a 
"one-size-fits-all" kind of a thing. I suggest that you make a small 
batch of the recipe that follows, adjusting the ingredients as needed 
until you come up with the right formula for your water situation. 

 
The Ingredients 
Washing Soda:
Sodium carbonate can be used
 as a pH regulator to maintain stable alkaline conditions and to 
neutralize the acidic effects of chlorine and raise the pH level. Without
 using washing soda, additional detergent is needed to soak up the 
magnesium and calcium ions. It effectively cuts oil or grease on dishes 
and is used as a descaling agent in boilers such as found in coffee pots
 or espresso machines, which leads me to think it would do the same in a
 hot dishwasher.
Baking Soda:
Sodium bicarbonate
 can be added as a simple solution for raising the pH balance of water 
(increasing total alkalinity) where high levels of chlorine (2-5 ppm) 
are present. A paste from baking soda can be very effective when used in cleaning and scrubbing. For
 cleaning aluminium objects, the use of sodium bicarbonate is 
discouraged as it attacks the thin unreactive protective oxide layer of 
this otherwise very reactive metal.
*Note
 that this is very similar to washing soda and many recipes interchange 
this ingredient. If one doesn't work well for you, try the other. I 
found the washing soda worked best for me.
 
Borax:
Sodium borate
 is used to help cut grease, reduce spots and film by conditioning the 
water, and removing hard water minerals. It also works as a disinfectant.
 This is the one item that  I would caution you to keep out of reach of 
little ones. It is mined from the ground and is a natural mineral, but 
not safe for ingestion. I took a tour of the 20 Mule Team plant in 
Boron, California, and was amazed at all the uses this product has in 
our everyday lives (and we aren't even aware of it)! 
Citric Acid:
Citric acid's ability to chelate metals makes it useful in soaps and detergents by allowing these cleaners to produce foam and work better without the need for water softening. It also will
 remove hard water stains from glass without scrubbing. In addition, it 
works as a natural antimicrobial agent. I recommend purchasing Frontier Naturals one pound bag of Citric Acid from either Amazon,
 Frontier Naturals, or a food co-op. It will run you about $7-9, but 
should last a while. I wanted to get started right away, so I purchased 
some Fruit Fresh, which has some citric acid in it (or you could buy 
cheap lemonade packets), but it cost me more and I don't recommend this 
unless you're in a bind. However, it seems to be working well. I'll be 
ordering bulk citric acid from the co-op in the future! 
Salt:
A
 lot of recipes for homemade dishwasher soap include salt, but I'm not 
sure that it's really a necessary ingredient. While it is often thought 
to reduce the effects of hard water, I've read elsewhere that adding salt along with the detergent does not soften the water much, but the water will gain some additional ability to dissolve hard water ions. How much is the question. Keep in mind that
 as water drops remaining on the dishware evaporate, deposits of the 
salt will likely remain. To combat this, the use of a rinsing agent such
 as vinegar will help eliminate the spotting. *If you should choose to use salt, do not use regular table salt, but rather course Kosher salt. Read more here. 
 
 

 
Homemade Dishwasher Soap 
{soft water recipe}   
1/2 cup borax ($.18)
1/2 cup washing soda ($.33)
1/4 cup food grade citric acid ($.66)
* for hard water, try increasing the amount of borax or add 1/4 cup course kosher salt, not regular salt! Read more here and scroll to middle of the page where it says "Dishwasher Salt". 
Combine ingredients and use 
sparingly. I use only about 1 to 1 1/2 tsp. per load. (For hard water, 
you may need more.) Keep in a handy container near your appliance.
Total cost: $1.17 per batch (mine was actually closer to $2.01 because I used the expensive citric acid). 
Total # Loads: 81 per batch (@ 1 1/2 tsp. per load)
Total Cost Per Load: $ 0.014 - Nice!
Rinse Aid: Add white vinegar to the appropriate dispenser. Refill as needed. (I do this even for my soft water).
 
 
No comments:
Post a Comment